ABB Limited is a leading engineering and technology company providing products and solutions for integrated process control and safety (ICSS), SCADA, electrical distribution, instrumentation, analytics, motors, drives and telecommunications. ABB act as the Main Automation or Main Electrical Vendor (MAV, MEV) or as the Main Automation Contractor (MAC) ABB also provides performance consultative services for Life Cycle Management, reliability and safety assessment for capital productivity and operational profitability whilst minimising environmental impact in the Refining, Gas and Petrochemical sector. ABB are a major solution and service provider covering both automation and power technologies for its own and 3rd parties' products.
ABB Global Consulting is an international technical consultancy providing support to offshore, refining, storage, distribution and gas processing operations to improve operational performance and to meet regulatory compliance.We offer expertise in the following areas: ATEX / DSEAR implementation. Energy optimisation, Environmental consultancy, Hazard and risk assessment, Human factors, IEC 61508 / 61511 and SIL determination, Integrity management, Legislative and engineering auditing, Pressure relief assessments, Process engineering software, Project and design support, Reliability and maintenance, Risk based inspection, process safety management and technical training.
Experience in the production of twin shaft rotary lobe machines has a long tradition in Aerzen. Founded in 1864 Aerzen produced Europe’s very first rotary piston machine in 1868. The manufacture of rotary piston gas meters began in 1930, followed by the introduction of the first rotary screw compressor in 1943. Wherever air and gases of most various kinds are conveyed, compressed or measured twin shaft rotary lobe machines made by Aerzener are used. The worldwide Aerzen Sales- and Service organisation enjoys high reputation.
Air Products is a leading supplier of industrial gases and related equipment and has built leading positions in key growth markets such as semiconductor materials, refinery hydrogen, natural gas liquefaction and advanced coatings and adhesives. For over 60 years, Air Products has developed expertise in the safe and reliable supply of industrial gases to a diverse base of customers in the manufacturing, service and process industries. The expertise is particularly evident in the supply of hydrogen to petroleum refineries and chemical facilities where Air Products has established a world leadership position through the operation of more than 60 steam methane reformers, off-gas plants and liquid hydrogen facilities. Hydrogen is directly delivered from these facilities or via pipeline networks reliably to customers worldwide. Air Products is recognized for its innovative culture, operational excellence and commitment to safety and the environment.
Alfa Laval is a worldwide leading supplier of Process Welded Heat Exchangers for the Refining, Petrochemical and Oil & Gas Industries. Today, the Compabloc heat exchanger is used in more than 1000 positions within the main refineries worldwide, on several processes: ADU on Crude Preheat trains, but also VDU, SRU and Amines in general, FCC, Hydrotreaters, Hydrocrackers, and still it's the only Laser Welded Heat Exchanger -openable on both sides for accessibility or maintenance- available on the market as alternative to Shell and Tubes. The Spiral Heat Exchanger is as well widely used on FCC slurry oil coolings and on Visbreakers Tar Cooling, offering -thanks to the single-channnel configuration- an exceptional resistance to fouling. As of today, Alfa Laval has got -for the whole Welded Heat Exchangers range that offer to refineries, and including the Compabloc, the Spiral, the Packinox and the AL Olmi Process Air Coolers- more than 2000 references up and running.
Amistco Separation Products, Inc, provides engineered solutions for a wide range of phase contacting and separation applications. In addition to mist elminators and liquid-liquid coalescers, our products include trays, structured and random packings, tower internals, and coalescing filters. We also fabricate numerous subassemblies and turnkey separation packages for primary contractors and end users worldwide. Amistco began manufacturing knitted wire mesh mist eliminators in Alvin, Texas, in 1991. With greatly expanded capabilities and an ever-widening range of products, Amistco now occupies a new 40,000 sq. ft facility. Our success is built upon prompt and consistent customer service. From the procurement of materials to delivery of finished products, each phase of manufacturing is closely monitored to assure that customer specifications are satisfied or exceeded. Amistco separation specialists are readily available to assist customers with technical design questions.
ARCA Regler, the parent company of the international ARCA Flow Group, is one of the leading companies in control valve technology. It concentrates since more than 85 years on the development, the production, sales and service of pneumatic and electric activated control valves.In the field of (petro-)chemical and industrial process control ARCA has established a real new standard with the modular ECOTROL® control valve system. Whether metal- or soft-seated, whether with low-noise trim or with double guided stem, the unique SWS exchange system offers a solution for each application. Combined with the self-control capabilities and the state-of-the-art diagnostic tools of the smart positioner ARCAPRO®, ARCA valves offer control valve technology without any compromise, simply the best in performance, quality and reliability.
Downstream Services
Improve profitability with customized downstream chemical solutions. Our downstream chemical services and technology for the worldwide pipeline, hydrocarbon processing, and petrochemical industries help you to increase your production, improve plant safety, and equipment reliability.
We can support your hydrocarbon processing and water treatment operations and industrial power generation projects.
We have additives for treating for crude oils and finished fuels. Also, services and chemical solutions to enhance your pipeline’s flow and integrity.
For more information about customized downstream chemical solutions, please contact us.
For over 30 years, Bryan Research & Engineering has provided the energy industry with process simulation software renowned for its ability to accurately and efficiently predict the performance of gas processing, refining and petrochemical processes. Today, engineers around the world turn to BR&E’s ProMax® software to simulate current operations and design future facilities. ProMax combines and significantly extends the capabilities of its predecessors, TSWEET® and PROSIM®. Totally integrated with Microsoft Visio®, Excel® and Word®, ProMax uses familiar tools to increase its ease of use and flexibility. These features combined with ProMax’s state-of-the-art technology including over 2300 pure components and 50 thermodynamic package combinations, along with BR&E’s unparalleled client services unite to make ProMax the “must have” simulation resource.
Burckhardt Compression AG is a world leader in reciprocating compressor technology and the only manufacturer of a complete series of Laby® (labyrinth piston), process gas, and hyper compressors for numerous applications. Their compressors are used in the field of oil refining, chemical and petrochemical industries, air separation, as well as gas transport and storage. Burckhardt Compression¹s worldwide service network provides the full range of customer support services; from supply of quality compressor components over valve service to complete plant overhauls, from engineering to the fulfillment of extensive modular service contracts.
Catalytic Distillation Technologies (CDTECH) is a dynamic process technology company that specializes in catalytic distillation based processes for the chemical, petrochemical and refining industries. CDTECH was formed in 1988 to research, develop, and market process technology, and is a 50/50 partnership between Lummus Technology, a CB&I company, and Chemical Research and Licensing Co. (owned by CRI International, a Shell subsidiary). Catalytic distillation (CD) is a unique system that combines two fundamental unit operations, namely reaction and distillation in a single piece of equipment, which simplifies the process, reduces capital costs and operating expenses, enhances yields, and extends the catalyst life. CDTECH’s goal is to make modern refining and chemical processes more compact and efficient. CDTECH is a global licensor with a wide range of technologies. Among them: • CDEthers® technologies, to increase octane and decrease olefins in the gasoline pool or to provide for today’s increasing demand for use of biofuels, including ETBE and TAEE, • CDHydro® selective hydrogenation process - to hydrogenate aromatics, dienes, olefins and acetylenes, • CDHDS® hydrodesulfurization process, a low-cost route to cleaner burning gasoline with maximum octane retention • CDAlky® alkylation, a low-temperature sulfuric acid alkylation process and octane booster, • Benzene CDHydro®, selective hydrogenation of benzene in reformate, to meet today’s stricter gasoline standards • CDIB®, a process by which high-purity isobutylene produced from MTBE feedstock, capable of up to 99.9% purity. CDTECH has licensed more than 200 operating CD units, developed 39 technologies, commercialized 27 unique technology applications, and has over 20 years experience in meeting the chemical, refining and petrochemical industries needs.
Chevron Lummus Global (CLG) offers a suite of hydroprocessing technologies and catalysts to convert heavier, poorer-quality raw materials into ultra-clean transportation fuels and lubricants, thereby benefiting the environment. From the LC-FINING process to upgrade tar sands and high-metals vacuum residuum, to the RDS/VRDS processes for producing high-quality RFCC-feed and low-sulfur fuel oil from residuum – CLG innovations such as OCR and UFR efficiently yield greater volumes of valuable and clean hydrocarbon while minimizing carbon rejection. The vacuum and atmospheric gas oils, along with contaminated, aromatic refinery streams, can then be processed in CLG’s customized ISOTREATING (hydrotreating) and ISOCRACKING (hydrocracking) configurations for the targeted slate of ultra-low-sulphur products, including feed for CLG’s ISODEWAXING/ISOFINISHING process to produce API GP II and III lubricant base oils.
For 50 years, we have provided world-class piping systems to the chemical, petrochemical, and processing industries throughout the world. We solve problems that require expertise in heat transfer and fluid flow, piping design, and specialty fabrication. With an ASME code-certified production facility and technical team on staff, we stand ready to serve you!
Criterion is an international company that supplies catalysts, process technologies and catalyst services for a wide range of refining applications. We have more than 50 years experience developing, manufacturing, testing, marketing and servicing catalysts that are used in every type of hydroprocessing operation. We offer a variety of process technologies that can be packaged with our catalysts to create a complete, optimized solution for any hydroprocessing problem or supplied independently. Criterion is a wholly owned subsidiary of CRI/Criterion Inc., which is a part of the Shell Group and a major supplier of refining and petrochemical catalysts, processes and know-how. Criterion operates globally but acts locally. Having multiple research & development, manufacturing and technical services facilities spread around the world gives us better insights into local trends and into an individual customer’s situation and provides the means to respond rapidly to each customer’s current and future needs. Our Markets, Customers, Products & Services Criterion is the world’s largest supplier of hydroprocessing catalysts, which includes catalysts for hydrotreating, hydrocracking, hydrogenation, isomerization and naphtha reforming. We work with refiners in virtually every part of the world. Our goal is to help each customer realize greater value from his hydroprocessing assets by providing superior catalysts and customized technical advice. To accomplish this goal, we set our sights on building lasting relationships and a teamwork environment with each customer. Our catalyst portfolio covers the entire range of hydroprocessing applications which allows our customers to have one stop shopping’ convenience: • Tail Gas Treating • Alkylation Pretreatment • Paraffin Isomerization • Xylene Isomerization • Naphtha Reforming (Fixed-bed & Moving-bed) • FCC Gasoline Desulfurization • Naphtha Hydrotreating • Distillate Hydrotreating (including ULSD bio-diesel co-processing applications) • FCC Pretreatment • Hydrocracking Pretreatment • Hydrocracking • Lubricants Production (Hydrocracking, Hydrofinishing & Dewaxing) • Fixed-bed Resid Hydrotreating • Ebullating-bed Resid Hydrotreating • Catalyst Bed Grading Products.
The nine businesses which comprise Oil & Gas Systems within Curtiss-Wright Flow Control are; TapcoEnpro, DeltaValve, Groquip, Valve Systems and Controls, Total Automation Solutions, Farris, Farris Engineering, Solent & Pratt, and Sprague Products. These businesses, which have served the oil and gas industry for numerous years, are an integral part of past success as well as future growth for Curtiss-Wright Flow Control.
TapcoEnpro: The leader in high temperature, severe service control valves with digital electro-hydraulic actuators and other mission critical products for the global refining and petrochemical industry. As an ASME Code facility since 1972, TapcoEnpro has developed a global reputation for providing quality pressure vessels and reactors for the refining, chemical and power industries.
Farris/Farris Engineering: Global manufacturer of pressure relief valves to the hydrocarbon, refining, petrochemical, power and general processing industries. In addition to a complete line of pressure relief valves, Farris provides total pressure system management solutions that support a facility’s entire lifecycle. Our Farris Engineering Services team provides comprehensive pressure system design and audit services, providing processing facilities with a safe and hazard-free work environment.
DeltaValve: DeltaValve is a world leader in the design, engineering, and manufacturing of critical service equipment for delayed coking. Their flagship product--the DeltaGuard coke-drum unheading system--has set a new standard in safe and efficient coke drum unheading worldwide. The DeltaGuard is available for both the bottom and the top of a coke-drum. Other DeltaValve products include complete hydraulics and controls systems, in-line repairable isolation valves, a auto-switch coke cutting/boring tool, a drill stem guide and blowout diverter, and other related equipment for the delayed coker.
Groquip: Groquip serves markets in upstream and midstream oil and gas, petroleum refining, chemical and petrochemical, pulp and paper, UREA/Fertilizer production, air separation, waste water, terminals, transportation and fossil fuel power. In addition to representing both Farris and EST products, Groquip also represent products for Groth Corp., Continental Disc, Flare Industries, Sensidyne Gas Detectors, Fire Sentry Flame Detection, Gevalco, and Quest-Tech. Groquip also has extensive experience in valve and actuator repair services, including safety and safety relief valves, high end isolation valves, DeltaValve coke drum top and bottom unheading valves, pipeline and offshore pressure relief valves and ESD services, and much more.
Total Automation Solutions: Supplier and manufacturer of integrated automation and controls technology, products and services. TAS integrates quality OEM automation and control products with the optimum team of automation and control engineering resources.
Valve Systems and Controls: VSC specializes in turnkey valve and valve automation packages and systems for all facets of flow control operations with sign source responsibilities.
Solent & Pratt: With its headquarters in Bridgeport, United Kingdom, Solent & Pratt provides high performance butterfly valves for a variety of severe service applications.
Sprague: Sprague specializes in pneumatic and hydraulic valves, pumps and boosters.
With the combined capabilities of these Curtiss-Wright Flow Control businesses, and with the increasing demand for valves, pumps and systems within the processing market segments, we look forward to the future with great anticipation.
Belco Technologies Corporation is a DuPont company dedicated exclusively to the reduction of Particulate, NOx and SOx air pollutants from oil refinery sources. BELCO® has been in business since the 1960’s. BELCO’s product offerings include the following: - EDV® Wet Scrubbing Systems: These reduce SO2, SO3 and Particulates generated by Fluid Catalytic Cracking units (FCCU), Crude Distillation Unit Heaters, Incinerators, Power Boilers, Diesel Engines, etc. The BELCO’s EDV® Wet Scrubbing System has become the world standard for applications on FCCUs due to the open vessel design, un-pluggable features, and 5-8 years uninterrupted operation capability. - LABSORB™ Regenerative SO2 Control Systems: Reduces operating costs by regenerating the scrubbing buffer. Also greatly reduces any solid and liquid waste associated with scrubbing systems. - Wet NOx Controls: This process is applied to the EDV® wet scrubbing system to achieve greater than 90% NOx reduction at low temperatures and within the same vessel being used to reduce SOx, and Particulates. - Hitachi SCR systems - Shell Global Solutions Third Stage Separators (TSS) - Wet Electrostatic Precipitators
Elliott designs, manufactures and services compressors, steam turbines and power recovery expanders for the LNG, oil & gas, and petrochemical industries. Over the course of 100 years, Elliott has earned a global reputation for efficient, highly reliable turbomachinery products and services. Elliott’s full lines of centrifugal and axial compressors incorporate the most advanced technology available today in aerodynamics, rotor dynamics, materials and fabrication for state-of-the-art performance and reliability. Elliott compressors are used throughout the world in applications such as oil and gas production, refining, refrigerant strings for LNG and ethylene and propylene, synthetic fuel processing, and many other industrial processes. More than 30,000 of Elliott’s YR steam turbines are operating today throughout the world, providing power from 100 to 1500 kW. For larger turbine applications, Elliott’s multi-valve, multi-stage steam turbines produce up to 75,000 kW of power. Elliott is also a leader in power recovery expander turbines, rated up to 37,000 kW. With 25 offices and service facilities around the world, Elliott services turbomachinery from any OEM. Customers everywhere choose Elliott for installation, start-up, maintenance, repair, overhauls, parts replacement and fabrication, rerates, re-engineering, and project management. For precision engineering, extraordinary reliability and unparalleled service, the world turns to Elliott.
Enersul Limited Partnership, headquartered in Calgary, Alberta, Canada, has over 50 years of expertise in sulphur forming and handling. Enersul’s proprietary GX™ technology, is the sulphur industry’s leading choice for producing premium formed sulphur product and offers end users a variety of options for different production requirements.
Enersul has an established reputation as a leader in the sulphur processing industry, with the expertise and management capabilities to undertake operating contracts as well as project management and supply for all phases of formed sulphur processing projects. From equipment supply to ownership and operation of sulphur forming and handling facilities, Enersul is committed to providing its customers with safe, efficient and reliable service.
As a result of this extensive experience and expertise, Enersul is able to offer a full range of equipment and integrated services to the sulphur industry. Enersul’s services include sulphur forming technologies (GX™ and WetPrill™), formed and liquid sulphur storage and loadout, sulphur block pouring and block inventory reclamation, H2S degassing (HySpec™), liquid sulphur cooling, procurement and plant operation. Enersul also provides comprehensive engineering services that include FEED studies, design and fabrication. When these products and services are combined with Enersul’s on-site technical audits and process review, companies seeking answers to their sulphur handling questions are able to find them all in one place; Enersul.
ExxonMobil Research and Engineering licenses a multitude of technologies covering the full range of both fuels and lubes refining. We have earnedour reputation for licensing premier, well-engineered, technology solutions to address key industry issues. As a major research and engineering organization, we develop technology solutions to provide safety, reliability and margin improvements.
FLEXIM manufactures and sells worldwide the FLUXUS© flowmeters. These clamp-on ultrasonic flowmeters belong to the most versatile flowmeters available on the market. They can be used on pipes made of the most diverse materials with diameters ranging from 10 mm to 6500 mm (1/2" to 250”) and at temperatures between -20°C (-4°F) and 120°C (248°F). Combined with the special mounting fixture WaveInjector®, the transducers can even be operated on pipes as hot as 400°C (752°F). ATEX-certified transducers are available, as well as a seawater resistant ATEX-certified transmitter for offshore applications.
The Flexitallic Group is an international market leader in the manufacture and supply of high quality, high value industrial static sealing products.Developer of the spiral wound gasket in 1912 in the US, Flexitallic today continues its legacy of innovation with product materials like Thermiculite® and Sigma®. Flexitallic’s global customer service network of owned manufacturing facilities, manufacturing licensees and distribution network (over 750 distributors in 30 countries) ensure local demand is met quickly, with a combination of the highest product quality and customer service.With a varied product offering that includes spiral wound gaskets, semi-metallic gaskets, RTJ gaskets, kammprofiles, sheet gaskets, and dynamic and static packings, The Flexitallic Group draws upon its storied past and present day mixture of leadership, quality, service and technology to develop sealing solutions for industry all around the world.
GRABNER INSTRUMENTS, a member of AMETEK Inc., is known as one of the most innovative companies world wide developing and manufacturing automatic petroleum testing equipment and process analyzers. Grabner Instruments’ success is based on the development of portable, rugged and easy to operate fuel and oil analyzers for accurate quality control in the laboratory and in process.
The product range includes the following instruments: * Vapor pressure tester series MINIVAP * Process Analyzer MINIVAP ON-LINE * Flashpoint tester series MINIFLASH * Portable mid-FTIR gasoline and diesel fuel analyzers IROX 2000 and IROX DIESEL * Automatic Mini-distillation analyzer MINIDIS ADXpert * Mini-Viscometers MINIVIS II, MINIVIS 445, MINITEST FFK * Titrator MINIHYD * Sulfur Analyzer PHOENIX II * Mobile Fuel Labs Applications: GRABNER INSTRUMENTS analyzers are used for various applications in multiple industries, e.g. for analyzing and testing flavors, fragrances, food, petrochemicals and chemicals, biofuels, plastics, adhesives, paints and varnishes. They are used in the automotive, shipping, railway and racing industry, for mining, the metal industry, the pharmaceutical industry, in research and development, in waste and incinerating plants, in power plants as well as in governmental agencies and accredited laboratories.
Grace Davison is the world's leading supplier of fluid cracking catalysts and FCC additives to the petroleum refining industry. Advanced Refining Technologies, the Chevron/Grace joint venture for hydroprocessing catalysts, holds a leading position. Both Grace Davison and ART are known as technology leaders, providing refiners with premium, value-added products that maximise product yields and operations.
Topsøe has developed technology and catalysts for virtually all areas of hydroprocessing, from desulphurisation of light feedstocks for synthesis gas manufacture to hydrotreating of heavy resids and hydrocracking of vacuum gas oil. Our policy emphasises in-house development of proprietary technologies tailored to catalytic processes. Our development, production and engineering capabilities associated with catalysts and catalytic processes provide us with a unique position to address a broad spectrum of industry needs. For the petroleum industry, Topsøe has developed a series of hydroprocessing catalysts denominated the TK-series. TK hydroprocessing catalysts are used for reduction of sulphur, nitrogen, metals and aromatics in petroleum fractions. Topsoe has also introduced a new generation of hydrocracking catalysts with a very high selectivity for middle distillates. The transfer of licensed technology is carried out through design packages depending on the client's requirements. Topsøe has the flexibility to provide the client with scopes from process packages focusing on the pressure loop and containing only reactor specifications, to more comprehensive Engineering Design Packages containing process specifications for all the equipment within battery limits.
Hoekstra Trading LLC conducts open market, independent pilot plant testing programs on hydroprocessing catalysts. The programs focus on cross-vendor testing of competitive products, using standardized testing protocols. Test reports and activity rankings are available for immediate delivery to anyone seeking to better understand the relative performance of products offered by the various suppliers. Our reports include reviews and analysis of published technical literature on the products tested, and guidance for catalyst selection. Our pilot plant programs are multi-client studies; therefore results are offered at a small fraction of the cost of any go-it-alone catalyst testing option. We have tested hydroprocessing catalysts from all major suppliers. We continue to expand our database.
Idrojet S.A.S. has been working with international oil companies and services companies since 1975. Idrojet personnel have considerable experience; this know-how is amplified by the fact that these key personnel are inventors of equipment and methods used productively every day. Without a doubt, those inventions have enhanced the rapid growth of using water as an effective cutting material, demolition and cleaning tool. Some of the projects that our personnel have been involved with are: heat exchangers cleaning systems, heat exchangers and pipes transportation systems, heat exchangers extraction systems, abrasive cutting systems and concrete demolition and removal systems
Utilizing the vast catalyst development and manufacturing experience of its employees, Intercat specializes in the manufacture and sale of specialty additives for use in the fluid catalyst cracking process and of addition systems for delivering products to an FCC in a precisely controlled manner. Intercat additives afford refiners the ability to: • Tailor the selectivity of the FCC• Boost LPG yield (either propylene or butylene)• Decrease bottom yields• Reduce regenerator SOx, NOx, and CO emissions• Enhance Unit Conversion • Enhance Catalyst Performance• Promote CO Combustion• Enhance OctaneIntercat addition systems are patented equipment and control systems which allow refiners to accurately and reliably add catalyst and additives to the FCC unit within 1% of targeted values. The systems are installed in over 225 refineries worldwide and are known to deliver reliability, operational stability, and accuracy.
Intertek provides an extensive range of technical, consulting and testing services supporting the petroleum refining, gas, oil and gas, biofuel and petrochemical industries on a global basis. Intertek’s world class capabilities and expertise include pilot plant support, refinery support, catalyst evaluation and analysis, advanced analytical testing laboratories, quality control, research, cargo and tank inspection, corrosion control, E&P services, safety certification and much, much more.
ITW is an operating Company in the environmental field, with innovative technologies for tank cleaning, plant cleaning, exchanger/column cleaning and soil reclamation.ITW has developed a unique technology for On-Line Cleaning production Units, wherein an entire Unit can be cleaned in as low as 24 hours.ITW On-Line Cleaning is a powerful tool to improve Operational Excellence as well as to improve Turnaround Operations.For turnaround jobs, ITW can also offer a proprietary technology for cleaning/degassing/decontamination.ITW performs industrial cleaning/reclamation and turnaround jobs on a turn-key basis.ITW also supplies all the chemicals for process/ water treatments, together with related technical assistance.ITW operates since several years in the field of applied research, developing new technologies for the petroleum industry.ITW mission is to create value for its customers and to search for innovative, reliable and economic solutions to industrial problems.
Johnson Matthey Catalysts provides a range of high performance catalysts and process technologies which enable operators to meet product specifications, avoid corrosion, improve performance and gain value within the hydrocarbon processing industry. PURASPEC process technology provides oil refiners and gas processors with a simple and effective means of removing undesired impurities from hydrocarbon streams. For example, PURASPEC technology is widely used to remove chloride contamination from the product streams from catalytic reformers, sulphur contamination from natural gas, NGL and naphtha streams and mercury contamination from natural gas and naphtha streams. KATALCO catalysts are used in hydrogen production units and enable operators to maximise hydrogen production from hydrocarbon steam reforming plants. These catalysts make possible hydrogen production from a wide range of hydrocarbon feedstocks and KATALCO catalysts can be relied upon to provide a reliable and durable source of hydrogen. TRACERCO services enable our customers to optimise the operation of their facilities and their shutdown/maintenance strategy. These services are widely used to improve the control of distillation columns, the optimisation of the FCCU and in assessing operating problems on heat transfer systems.
Johnson Screens® designs and manufactures reactor internals for radial and down flow processes in refining and petrochemical applications: centre pipes, outer baskets, scallops, outlet baskets, inlet diffusers, collector/distributors, nozzles, support grids and beams, distributor trays, scale traps, etc. Johnson Screens® also offers a complete field service activity with a team of specialised and experienced supervisors available for different types of interventions like full installation, on-site repair, technical assistance or expertise, work supervision, inspection, etc.
Koch-Glitsch is a global leader in the design and manufacture of state-of-the-art mass transfer and separations technology products for the chemical, petrochemical, refining, and gas processing industries. Koch-Glitsch has two major business areas:Mass Transfer Technology – We offer a complete line of tower internals, including high performance and conventional distillation trays; grid, structured and random packing in metal or plastic; tower internals; and replacement hardware for distillation, absorption, stripping, and extraction columns. Products are available in a wide range of metals, plastics, thermoplastics, and fiber-reinforced plastics. Our KG-TOWER® Tray and Packing Hydraulic Rating software allows you to rate our products for your applications. Separations Technology – Devices for the removal of liquid and particulates from vapor streams are offered through our Koch-Otto York business group. We provide a complete line of products including wire mesh, coalescers, fiberbeds, chevrons, cyclones, and gas distribution devices for applications such as absorption towers, scrubbers, knockout drums, evaporators, pollution control, and general mist elimination. Products are available in a wide range of materials.Koch-Glitsch integrates design, fabrication, and installation to ensure faster and safer new construction and revamps with minimum down time. Our products and services are available worldwide through our global network of manufacturing, warehousing, and engineering facilities.
KTI the most widely recognized name in fluid processing and high temperature reaction kinetics, has thousands of fired heater installations on six continents, with operations in the Americas, Asia and the Middle East. With expertise in fired heater design and SCR systems, KTI is on the leading edge of designing heat transfer systems with best available emission reduction technology. We design, engineer and effectively execute, highly reliable and cost effective heat transfer systems and emission reduction systems, to maximize process performance at the lowest possible emissions. Broad Range of Applied Expertise For more than 45 years, KTI has built a solid reputation for innovative, cost- effective, and reliable steam reforming, heat transfer, and emissions reduction equipment for the hydrocarbon processing and power industries. KTI has the resources and organization to execute projects of any size anywhere in the world. KTI undertakes everything from feasibility studies to complete turnkey facilities, under fixed price or reimbursable arrangements, in accordance with the requirements of the client and the project. Whether we are building a single SCR system or multiple furnaces, turnkey or otherwise, KTI delivers superior quality to satisfied clients. HISTORY OF ADVANCED TECHNOLOGY INNOVATION * Ethylene SPYRO technology license * Hydrogen plant technology license * Built industry's first psa hydrogen plant for Union Carbide * Developed proprietary furnace simulation programs and standards including FURISM for steam reforming furnace design, EDC CRACK® for Ethylene Dichloride and PROFO for fired heater simulation.
MBI is the largest provider of blast resistant buildings in the world. MBI's long standing reputation as the most experienced, knowledgeable, and customer service oriented provider of quality blast resistant buildings in the industry has been built on the 1000's of fully compliant units we have designed, engineered, and manufactured to date. MBI has 1 million sq. ft. of manufacturing capacity in the United States, and another 600,000 sq. ft. available internationally in 3 different countries. This capacity allows MBI to efficiently deliver protective buildings to any continent or major body of water around the world, making it a truly global supplier. Along with MBI's extensive production capabilities, MBI has over a decade of experience in the blast resistant building industry. MBI's buildings provide an unmatched level of safety, protecting from blast/explosions, ballistics, projectiles, fire, chemical release, noise, forced entry, and natural disasters. MBI also has hundreds of lease buildings available. Standard buildings are 12x40 in size and carry a blast rating of 5 psi or 8 psi, 200ms, medium damage. These buildings can be utilized for an array of applications, such as offices, tool rooms, restrooms, permit areas, control rooms, first aid facilities, break areas, as well as many others. MBI offers competitive daily rates as well as flexible leasing packages
Merichem Process Technologies is the worldwide leading licensor of technologies and supplier of engineering and modularized equipment solutions for caustic treating light and middle distillate hydrocarbons to remove H2S, CO2, COS, RSH and/or naphthenic acids. These technologies are proprietary and are licensed to our end-users. Engineering and equipment are provided to meet the customer's project implementation needs. This is done in a professional project environment that meets the end-user’s specifications.
Merichem Gas Technologies has a complete portfolio of hydrogen sulfide (H2S) removal products and processes. For over 32 years, their technologies have treated a variety of gas streams in both upstream and downstream applications; resulting in more than 200+ process installations worldwide.
Michell Instruments offers products that reliably and accurately measure moisture and hydrocarbon dew point in natural gas and petrochemical industries: from off-shore dehydration and hydrocarbon reduction plant, to fiscal metering at transfer points and end user measurements of consumer gas moisture and superheat control in gas turbines. Michell's process moisture and hydrocarbon dew-point analysers.Products include Condumax II, a continuous on-line analyser that measures hydrocarbon dew-point temperature in natural gas. The Promet, a complete turnkey hygrometer system for moisture measurement in critical process gas applications and the Promet EExd, an EExd Flameproof ATEX and CSA certified version of the Promet. Cermax I.S. is another product which is a well proven portable hygrometer used throughout the world in the natural gas and petrochemical industries.
MOGAS Severe Service Ball Valves – quick quarter-turn operation for isolation and control applications
MOGAS® Industries is a leading manufacturer of severe service, metal seated ball valves for high pressure and high temperature, corrosive, abrasive and/or other harsh services. Our metal seated ball valves are proven performers for the power, refining / process, and mining industries.
Designed for severe service and absolute shutoff
MOGAS metal seated ball valves provide solutions to the main valve concerns of site engineers around the world.
* External leakage eliminated. Our ball valves include a quarter-turn, non-rising stem with precision-machined, external stem bearings and extensive stuffing box with dual anti-extrusion rings that maintain packing position.
* Absolute internal sealing. Our balls and seats are mate lapped for a 100 percent sealing surface and the seat spring, combined with the line pressure, provides a constant mechanical force that allows for thermal expansion. We sharpen the leading edges of the seat so that the metal-seated ball is cleaned each time the valve is operated.
* Dependable automation. The MOGAS ball valve design includes mounting flanges and flange bushings for easy change-out from manual to automated operation, while eliminating stem side thrusts produced by the actuator. A precision-machined "rigid" mounting bracket supports actuators in any position and the oversized stem allows maximum torque.
* Quality is built into every valve. Our strict quality control procedures ensure that each and every MOGAS valve is tested before leaving our factory. Our products are designed to exceed engineering specifications and all MOGAS pressure containing components meet or exceed the ASME B16.34 and ASME Section VIII standards. Our valve products are inherently fire safe to API 607, API 6FA, BS 6755, and tested to MSS-SP-61, API 598 or Class V shutoff for quarter-turn isolation and for rotary control technologies per FCI 70-2. What’s more, MOGAS severe service ball valves are certified PED compliant for the European market.
Mourik International is a dynamic contractor that provides industrial services for the refining-, petrochemical-, steel- and syngas industry. In this business to business environment we provide reactor and vessel related services as well as general industrial cleaning services. Working under inert and toxic atmospheres, with particular applications in catalyst handling and associated activities during plant shut-downs and revamps, is our core business. We strive to contribute to the success of our clients by providing high quality services and innovative solutions. Our main markets are: Europe, Asia Pacific, Americas and the Middle East. We think global, and can act local through our worldwide network of subsidiaries. UM Holding subsidiaries are located in the United Kingdom, Germany, Italy, Spain, Venezuela, Brazil, Aruba, United States of America, Saudi Arabia, Singapore, Thailand, Malaysia,Taiwan, India and China.
Our Energy Services division provides on-site, technology-driven chemical and service solutions to the global natural gas, petroleum and petrochemical industries. In addition to stimulation, recovery, production and process enhancements, we also deliver a full range of water treatment offerings to floating production storage and offloading vessels as well as refineries and petrochemical plants.The division is divided into an Upstream group composed of our Gas and Oil Field Production Chemicals and Adomite businesses, and a Downstream Refinery and Petrochemical processing business. Our upstream applications improve oil and gas production, extend equipment life and decrease operating costs through value added services and a full suite of production chemistry. Our downstream applications increase refinery and petrochemical plant efficiency and the useful life of customer assets, while improving refined and petrochemical product quality and yields.Our mission is to lead the industry in creating value for our customers and Nalco through differentiated technologies that save water and energy, enhance production and improve air quality, while reducing total cost of operations.
The NEWTON’S company is specialized in the manufacture of the industrial dessicants for chemistry and petrochemistry. The ability of NEWTON’S results from the repurchase of the industrial tool of DEGUSSA. This machine was modernized, given to the standards and was supplemented in order to produce by compaction, soda briquettes, potash briquettes and calcium chloride briquettes of quality.The process is already used to dry natural gases (propane, butane, LPG) or synthetic gases (vinyl chloride, methylene chloride) and for the dehydration of the solvents (Benzene, Tetrahydrofurane (THF), Dichloromethane (DCM), azeotropic mixtures and others). Moreover alkaline properties of caustic soda and caustic potash confer them capacities of desulphurization, decarbonation and neutralization of liquids and gases. Today, several industrialists use this mode of drying: TOTAL, GSK, SOLVAY, INNOVIA FILMS, SHELL, SASOL, SYNGENTA.
PROSERNAT supplies equipments and technologies to natural gas industry for 30 years. * With above 350 industrial references PROSERNAT know-how covers the whole range of gas treatment.* For all its technologies PROSERNAT supplies performance guaranteed process-equipment packages. PROSERNAT services can go from technology selection and process licensing to supply of complete turn-key units. * A unique team of gas experts and highly qualified engineers and technicians covering all disciplines: process, mechanical, instrumentation, electrical, automation engineering, procurement, project management and technical assistance.* An international presence with capacity to deliver units throughout the world, when required through local partnerships.* PROSERNAT is ISO 9001 certified since 1996. PROSERNAT a subsidiary of HEURTEY PETROCHEM and IFP Energies nouvelles* PROSERNAT is a highly technological engineering company dedicated to marketing of the most advanced gas treatment and CO2 capture technologies. PROSERNAT’s activities benefits from the support of its two shareholders: * HEURTEY PETROCHEM is the main shareholder of PROSERNAT. HEURTEY PETROCHEM is an engineering company and the world leading supplier of furnaces for all Oil & Gas applications. With HEURTEY PETROCHEM, PROSERNAT is par of an engineering group of above 1000 persons and above 350 M€ turnover with a strong international presence. HEURTEY PETROCHEM’s experience of stick built units also complements PROSERNAT’s expertise of modular construction. It allows PROSERNAT to offer its customers a unique portfolio of advanced gas treatment solutions.* PROSERNAT’s strong expertise of process technologies for natural treatment and CO2 capture, is backed up by long term R&D collaboration agreement with its other shareholder IFP Energies nouvelles, a world leading research and training center in the fields of energy transport and environment. * PROSERNAT also benefits from synergies with other companies of IFP Energies nouvelles Group, like for instance AXENS <http://www.axens.net/> for downstream applications. Technologies in compliance with environmental standards * PROSERNAT shares with his mother company IFP Energies nouvelles the will to bring to the market advanced processing solutions in compliance with environmental standards, such as capturing CO2.* PROSERNAT concentrates on technical excellence and commitment to its clients needs : performance, cost-effectiveness, reliability, safety with a reduced impact on the environment and an optimal use of essential energy sources.
Sabin Metal Corporation, East Hampton, NY, U.S.A. is the largest independent precious metals refiner in North America, serving a worldwide customer base. We recover and refine precious metal-bearing spent catalysts from hydrocarbon processes – pellets, beads, extrudates, and monolithic structures. Sabin recovers precious metals from catalysts with PGMs, gold, silver (and combinations) from soluble and insoluble alumina, silica-alumina, zeolite, and carbon supports. Precious metals are also recoverable from waste by-products associated with catalyst materials. We handle all details from suggestions on packaging and shipping arrangements through accurate materials tracking to final settlement with many options. Our new 120,000 sq. ft. refining facility in Williston, ND U.S.A. is specially equipped to sample and process precious metal bearing catalysts from hydrocarbon processes such as petroleum catalysts, VAM catalysts, and chemical catalysts . In house “pre-burn” capability and electric arc furnace technology provide total capability refining services for lower costs and faster turnaround.
SAMSON is a worldwide leading manufacturer of expertly engineered control valves and accessories for all industrial processes. Prominent manufacturers of special valves, such as Pfeiffer, Vetec, Starline and Air Torque, belong to the successful SAMSON group. Pfeiffer produces lined control valves for special applications. Vetec is noted for its rotary plug valves and special valves. Starline specialises in ball valves and Air Torque in compact rotary actuators. With 46 mostly independent subsidiaries and over 100 representatives or sales offices, SAMSON is on hand to provide local customer service all over the world.
Oil Refining - The Sandvik program includes a wide range of products for use in oil refning. One of our specialties is tubular products in corrosion-resistant materials contributing to longer service life and reduced maintenance. We provide, for example, duplex stainless steel <http://www.smt.sandvik.com/sandvik/0140/internet/s001664.nsf/062cc3b124d69a8ec1256988002a3d76/5c9686b745fcd615c12577c10032d943%21OpenDocument> and nickel alloys suitable for sour crude oil.
Our products are used in applications such as:
* crude destillation unit (CDU) overhead condensers
* hydro-treating units/hydro-desulphurization (HDS)
* seawater-cooled heat exchangers
* sour gas cleaning
* sour water treatment
Shaw provides comprehensive services to the energy, chemicals, environmental, infrastructure and pipe fabrication industries. Through its Stone & Webster and Badger organisations, Shaw offers state-of-the-art technologies and strong engineering, procurement and construction capabilities. Since 1990, more than 35% of the world’s added ethylene capacity has been based on our technology, and our specialists have designed two-thirds of the world’s Residue Fluidised Catalytic Cracking units. These offerings, along with vertical integration with Shaw’s pipe and steel fabrication capabilities and hands-on management approach ensure that we meet our customer requirements, every time.
SPECTRO is one of the worldwide leading suppliers of analytical instruments for optical emission and X-ray fluorescence spectrometry. SPECTRO manufactures advanced instruments, develops the best solutions for strongly varying applications and provides exemplary customer service. SPECTRO’s products are exemplified by unique technical capabilities that deliver measureable benefits to the customer. From its foundation in 1979 until today, more than 30,000 analytical instruments have been delivered to customers around the world. AMETEK, Inc. is a leading global manufacturer of electronic instruments and electric motors with an annual turnover of approximately 2.1 billion US$. AMETEK’s corporate growth plan is based on four key strategies: Operative excellence, strategic acquisitions and alliances, geographic and market expansion as well as new products. AMETEK’s common stock is a component of the S&P MidCap 400 Index and the Russell 1000 Index.
Süd-Chemie offers catalysts required in the production of a wide range of petrochemical products, including olefins such as ethylene and propylene, and aromatics such as styrene. Notable products include HOUDRY® Catofin® catalysts for use in isobutylene or propylene production and the Group’s styrene production catalyst, STYROMAX® as well the catalyst for selective hydrogenation of acetylene to ethylene. In addition, MT-Prop, a highly specific zeolite catalyst has been developed as the key element of producing propylene from methanol in Lurgi’s innovative process.Products supplied by Süd-Chemie for refineries include catalysts for the production of hydrogen, gasoline and clean fuels plus innovative catalysts for gas-to-liquid (GTL), coal-to-liquid (CTL) and BTL (biomass-to-liquid) applications. These are complemented by a large selection of guards and traps, which protect valuable downstream catalysts and aid refinery operational reliability. For refinery customers, Süd-Chemie focuses on providing catalysts with reliable performance. The catalysts are known for their durability and the value they add to the refinery processes via prolonged catalyst life and reduced plant down time. In the area of olefin polymerization, Süd-Chemie offers C-MAX® - a series of Ziegler-Natta catalysts which is highly optimized for the manufacturing of Polypropylene, It is suitable for a variety of different polypropylene production process platforms. C-MAX® catalysts enable PP producers to manufacture their entire product range with high activity, excellent operational control and competitive operational cost. C-MAX® catalysts are commercially well proven in several units both for major bulk loop/gas-phase and CSTR processes.
Sulzer Chemtech Ltd, a member of the Sulzer Corporation, with headquarters in Winterthur, Switzerland, is active in the field of process engineering and employs some 1800 persons worldwide. Sulzer Chemtech has over 40 years of application experience with trays, structured and random packings as well as with crystallization and pervaporation. Customers benefit from our worldwide presence, extensive technical services, and recognized leadership in the design of column internals.At Sulzer Chemtech, decades of design, construction and manufacturing experience combine to ensure our column internals meet the requirements. Each internal we offer has been thoroughly researched at our extensive test facility, and consistently provides superior reproducible results no matter the worldwide location you purchase from. For every application, Sulzer Chemtech can offer a solution fitted to particular needs.Sulzer Chemtech has accumulated application know-how and experience in developing, designing, supplying and servicing mass transfer equipment in the Chemical, Petrochemical, Refining, Gas Processing and Speciality industries. Only the very best technology solutions can secure the competitive advantage which our customers need in today’s highly demanding conditions. Leadership in technology and application know-how is fundamental to our success.
Designed to improve upstream and downstream process applications, Thermo Scientific instruments ensure optimal product quality, maximise product yield and reduce manufacturing costs. Industry leading products include the SOLA II, a sulphur on-line analyser with detection limits as low as 25 parts per billion; KRIL, a non-contacting foam/interface nuclear level gauge for coke drum monitoring; M-PULSe, a multi-path ultrasonic liquid flow measurement system with ATEX Zone 0 certification; Sarasota liquid and gas density meters for continuous online density measurement during fiscal/custody transfer; a wide range of level measurement systems for liquefied natural gases to acids; and a full line of gas flow computers, including the new AutoEXEC with capacity for 32 lines to maximise input/output. All Thermo Scientific instruments are highly reliable, offer ease-of-operation and are built to endure harsh operating environments.
Tiger Tower Services provides the following for the refining, petrochemical, gas and fertilizer industries: * All types of Trays/Packings * Distributors * Accumulators * Feed/Draw Arrangements * Repacking * Mist Eliminator Replacements * Welding Services (overlays, etc) * Modifications to support rings and bars * Vessel resections * Nozzle installation and repair * Weld overlay-external, internal, and nozzle * Strip lining-installation and repair Included in our services are:* QA/QC * Safety * Inspection – CWI and API 510 Qualified Personnel * Engineering – Design & analysis of pressure vessels Addressing your needs with: * Fast Mobilization Emergency Services * Single Tower or Plant Wide Turnaround * Cost Effective * On-Time Goals * Experienced & Specialized Craftsmen & Supervisors
With more than 2,000 plants to its credit, Uhde is one of the world's leading engineering companies in the design and construction of chemical, refining and other industrial plants. We have subsidiaries and associates in all four corners of the globe. This worldwide network with over 4,500 employees is active in a number of different fields: fertilisers, electrolysis, gas technologies, oil, coal and residue gasification, refining technologies, organic intermediates, polymers and synthetic fibres as well as coke plant and high-pressure technologies. We offer our customers not only cost-effective high-tech solutions in industrial plant construction and the entire range of services associated with an EPC contractor but also comprehensive service packages for the entire life cycle of their plants.
Weir Minerals Lewis Pumps is known internationally in the sulphur, sulphuric acid and phosphoric acid industries with equipment installed in more than 120 countries worldwide. Founded in 1891 as Chas. S. Lewis & Co., Inc., today Weir Minerals Lewis Pumps is the recognized world leader for pumps and valves in Sulphuric Acid, Molten Sulphur Pumps & Phosphoric Acid Pumps. Weir Minerals Lewis Pumps customer service commitment has been a major contributor to our worldwide success. Senior Weir Minerals Lewis Pumps sales engineers are available to assist your plant personnel address a wide variety of operations maintenance and installation questions.
WorleyParsons is a leading provider of engineering, procurement and construction management services to the resources & energy sectors and complex process industries. Across our comprehensive global network of 35,100 people in over 40 countries, our four customer sector groups – Infrastructure & Environment, Power, Hydrocarbons and Minerals & Metals, use their extensive expertise to deliver small studies through to mega-projects.
Yokogawa builds control and instrumentation solutions offering tangible benefits. System elements interact to provide benefits including problem prediction, real-time alarms, remote diagnostics, device upgradeability, 24/7 data and on-demand management reports.
Zeochem has long been an important player in the Zeolite adsorbents business. Zeochem molecular sieve adsorbents are well-known for their excellent properties in terms of adsorption capacity and also in terms of kinetics. Zeochem silica gel products belong to the high performance end of the market, and include tailor-made chromatographic gels for the pharmaceutical industry. Zeochem is also becoming ever more well-known and respected for their quality in producing zeolites for the hydrophobic catalyst and adsorbents markets. There are two ranges of products covering these applications, and they are characterised by the ZEOcat and ZEOflair ranges. These special High Silica Zeolites of unusual crystal structure have become an important part of the Zeochem product portfolio. These products are characterised by their hydrophobic nature. They are more acidic than the standard A and X types; and they possess a high active surface area. Add to this good kinetics, and excellent thermal stability; and one can see why these products are highly regarded in a number of catalytic applications. While the ZEOcat range is extensive, it covers the better known ZSM-5 types, Beta, Mordenite and L-type structures. ZEOflair products are designed more for the adsorption of organic odours from gases, from plastic formulations and surfaces.